|
- Multi-Channel Crossover allows fine-tuning of each channel, balancing the low and high frequency o
- Multi-Channel Crossover allows fine-tuning of each channel, balancing the low and high frequency output to maximize performance. You will need to use separate amplifiers to drive a specific frequency band, and this results in more control of the output signal and better, more accurate speaker response. You'll improve headroom and minimize distortion in the process.
- Subwoofer Outputs with LPF refers to a pair of output jacks that are intended to be connected to a dedicated amplifier/subwoofer combination, greatly enhancing your vehicle's bass performance. The included low pass filter (LPF) allows you to select the crossover point at which the subwoofer begins to operate. This gives you more flexibility in blending the subwoofer output with your main speakers.
- Low Pass Filter (LPF) is a crossover component that blocks high frequencies allowing only lower frequencies to pass through.
- High Pass Filter (HPF) is a crossover component that blocks low frequencies allowing higher frequencies to pass through.
- EQ Selector for Front, Rear, F&R, or defeat.
- Chassis Type DIN
- Built-in EQ 10 Band
- EQ Frequencies Variable 30-800 Hz, 800-16 kHz
- EQ Range +/- 12 dB
- Low Pass Frequencies Variable 30-800 Hz, 800-16 kHz
- MidPass Frequencies Variable 30-800 Hz, 800-16 kHz
- High Pass Frequencies Variable 30-800 Hz, 800-16 kHz
- Subwoofer Level Control Yes
- Display LCD
|
Link to this page
