Skunk2 Swaybar Swaybars/Braces

Skunk2 Swaybar Swaybars/Braces 

DESCRIPTION

The Skunk2 Racing Sway Bar helps provide the ultimate handling performance for late model Civics and Integras. Since, a sway bar is in essence a large spring, hot-forming 6150 alloy-steel allows Skunk2 Racing Sway Bars to behave more consistently and predictably than cold-formed sway bars. Each sway bar comes with all necessary hardware, including sealed endlinks. Front: 26mm Rear: 21mm Available for 92+ Civic EX, Si and 94+ Integra.

USER REVIEWS

Showing 1-1 of 1  
[Mar 27, 2001]
Nate
Model Reviewed: 1995 Acura Integra GS-R

Strength:

Body roll in the rear is significantly down, my rear tires have to work much harder now. The back half of my car feels like it tracks MUCH better.

Weakness:

-Finish on paint not teriffic (but it's under your car)
-Bar ends don't fit perfectly with stock endlinks.

The 21mm bar looks great under the car, powdercoated red. Installation is easy, but the holes in the bar ends are too big, and there is some play between the bar and the bolts that pass through them, causing a clanking noise sometimes. Just be sure not to over torque the endlink bolts, and you'll be fine. Car handles very nicely, no more understeer. Feels like an ITR.

Similar Products Used:

Less body roll than factory 14mm rear swaybar.

OVERALL
RATING
4
VALUE
RATING
4
Showing 1-1 of 1  

(C) Copyright 1996-2018. All Rights Reserved.

carreview.com and the ConsumerReview Network are business units of Invenda Corporation

Other Web Sites in the ConsumerReview Network:

mtbr.com | roadbikereview.com | carreview.com | photographyreview.com | audioreview.com